Is Polyvine decorators varnish waterproof?

The Polyvine Decorators Varnish is a revolutionary water based varnish for the protection of a wide range of decorative surfaces. It is suitable for interior emulsion, wallpaper, fabric and plaster work.

What does dead flat varnish mean?

Dead flat is a coating or paint with absolutely no gloss or sheen. A dead flat paint hides lapping marks and roller directional pattern (as well as other application imperfections) better than a standard flat paint.

Are decorators varnish waterproof?

Packed with fade and water resistant properties, this clear varnish protects your wallpaper against stains, scuffs and soaks, even helping prevent any algae, mildew or fungi from penetrating your paper. What makes Decorators Varnish so good for wallpapers is its the quick-drying clear application.

Can you paint over Polyvine decorators varnish?

Polyvine dead flat decorators varnish According to Polyvine, whose products have so far always done what they said on the tin, their dead flat decorators varnish should dry to a non-reflective finish over emulsion paints.

Is Polyvine decorators varnish non yellowing?

A tough, quick drying, easy to apply, non-yellowing varnish for exterior wood.

What is decorators varnish for?

Polyvine Decorators Varnish is a water-based coating for use on a variety of decorative surfaces. Ideal for applying over emulsion paints, wallcoverings, fabric and plaster where it protects against scuffs and stains. Also ideal as a plaster and fabric primer, a fabric stiffener and also protects wood.

How do you use dead flat varnish?

Dead Flat Varnish can be applied by brush, roller, or HVLP spray gun. Do not apply when air and surface temperature are below 50°F (10°C) or high humidity conditions exist. Optimal application conditions are 60 to 80°F (16 to 27°C) and 30 to 60% relative humidity. For most applications, thinning is not necessary.

What does dead flat mean?

: the portion of a ship’s transverse form that has the same form as the midship or largest section. — called also straight-of-breadth.

How do you remove decorators varnish?

Application equipment can be cleaned using soap and water before the varnish dries. Wipe any excess off surfaces with a damp, lint-free cloth. Any dried deposits will need a paint stripper to remove them.

Is Polyvine decorators varnish non-yellowing?

Can you put clear varnish on top of emulsion paint?

Varnish works best on surfaces that are dry and clean. Before applying the first coat of varnish over the emulsion paint, make sure to clean the surface thoroughly. There should be no dust or dirt on the surface.

How long does Polyvine varnish take to dry?

Drying time: 15 minutes to 1 hour depending on temperature. Coverage: 15-20 square metres per litre.

What kind of finish does polyvine dead flat decorators use?

Assume makes an ass out of you and me! According to Polyvine, whose products have so far always done what they said on the tin, their dead flat decorators varnish should dry to a non-reflective finish over emulsion paints.

What kind of Floor Varnish does polyvine use?

The Polyvine Heavy Duty Floor Varnish is an ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish. Formulated especially for floors and areas of high wear, this is the product you need to show your flooring you care.

Can you use chalk paint with polyvine varnish?

Polyvine decorators varnish. @julie – (acrylic varnish will not yellow) but with chalk paint use wax for protection. Extra coats of wax provide extra protection. If wax isn’t durable enough for the job in hand, it is advisable to choose a different paint system.

What do you do with your polyvine furniture?

We walk over them, drag chairs across them, drop food on them, brush them, hoover them, exercise on them, play on them, dance on them – the list goes on. But, do we protect them properly? At Polyvine, we have the solution.