What is the default password for Nexus?

admin123
The default password for user admin in Nexus is admin123 . The first security measure is to change the default password.

How do I reset my Nexus password?

x? If you had the user’s email address set properly (and the smtp configuration set properly), you could click login in the UI and select forgot password, enter the username and email address, and a new password will be sent to you.

How do I reset my Cisco Nexus 5000?

Reset the switch to factory defaults:

1. Erase the existing configuration: write erase.
2. Reload the switch software: reload.
3. In the configuration wizard, enter the basic switch settings: Admin password.
4. When prompted, enter the user name and password to log in to the switch.

How do I find my Nexus password?

Available in Nexus Repository OSS and Nexus Repository Pro The initial password for the admin user can be found in an admin. password file found in the $data-dir directory after starting the server.

What is the default Jenkins password?

admin/password
The first time you start Jenkins, the configuration is created along with the administrator user and password. The default login is admin/password .

How do I unlock my Nexus tablet if I forgot my password?

If you set a pattern to unlock your device, you are in luck. Try to unlock your Nexus device 5 times and a “Forgot Pattern” option will appear. After selecting that, you can enter your Google Account email and password to unlock your device and reset your pattern.

How do I reset my password on my Nexus 7?

Forgotten screen lock.

1. Turn your tablet off.
2. Hold the volume down key.
3. Turn your tablet on.
4. Press the volume up key.
5. Using the volume down key, highlight Wipe data/factory reset.
6. Press the power key to select Wipe data/factory reset.
7. Press the volume ups key.

How do I reset a Cisco switch to factory default?

Hold the “mode” button on the front of the switch for 10 seconds. The lights will blink then go solid – the switch completely wipes all configuration and then reboots.

How do I remove startup-config?

Enter configure terminal to go to Global Configuration Mode. Enter config-register 0x2102. Enter end, and then enter the write erase command to delete the current startup configuration on the router. Enter reload to reload the router.

How do I reset my Cisco switch password?

Here is an easy way to physically perform a password recovery on a Cisco Catalyst Switch. Step 1: Connect your PC or terminal into the switch console port with the blue console cable. Step 2: Open up a Hyperterminal for emulation and set the speed to 9600 baud. Step 3: Unplug the power cable to the switch.

When to use layer 3 and VPC on Cisco Nexus 5500?

In a non-vPC topology, when the Layer 3 and SVI interfaces are down, the redundant Cisco Nexus 5500 Platform switch becomes the active peer for all FHRP groups and it continues to forward traffic. In a vPC topology, although the SVI interfaces are suspended, the vPC member ports are still up on the Cisco Nexus 5500 Platform switch.

How to configure Cisco Nexus 5000 NX OS interfaces?

Configures IEEE 802.1Q VLAN encapsulation on the subinterface. The range for the vlan-id is from 2 to 4093. Displays the Layer 3 interface statistics.

Can a Cisco Nexus 5548 switch perform layer 3 forwarding?

When you use a Cisco Nexus 5548 switch or Cisco Nexus 5596UP switch as a default gateway for hosts, you can deploy the First Hop Redundancy Protocol (FHRP) to provide default gateway redundancy. Beginning with Cisco NX-OS Release 5.0 (3)N1 (1b), an active FHRP peer and a standby peer can perform Layer 3 forwarding when you enable vPC.

What happens when a Cisco Nexus 5500 module fails?

When a Layer 3 module fails on a Cisco Nexus 5500 Platform switch all Layer 3 interfaces are suspended, including Layer 3 port channel and SVI interfaces. As a result, the Layer 3 routing table on the neighboring routers is updated which results in the north to south traffic to be directed towards the peer Nexus 5500 Platform switch.