Does bulk modulus change with temperature for water?
Contents
Does bulk modulus change with temperature for water?
One can notice that the bulk modulus is nearly constant from 0 to 300 K and decreases linearly with increasing temperature for T > 300 K. The compressibility increases with increasing temperature at a given pressure and decreases with pressure at a given temperature.
Does bulk modulus change with temperature?
It is well established that the product of the volume coefficient of thermal expansion and the bulk modulus is nearly constant at temperatures higher than the Debye temperature. Using this approximation allows predicting the values of the bulk modulus.
What is the bulk modulus of water?
approximately 300,000 psi
Water has a bulk modulus of approximately 300,000 psi (2.1 GPa) and therefore a compressibility of 3.3 × 10−6 (psi)−1. A typical diesel fuel has K = 243,700 psi at 85°F and a pressure of 285 psi.
What is the bulk modulus of water at 20 degrees Celsius?
2.2 GPa
Selected values
| Water | 2.2 GPa (0.32 Mpsi) (value increases at higher pressures) |
|---|---|
| Methanol | 823 MPa (at 20 °C and 1 Atm) |
| Air | 142 kPa (adiabatic bulk modulus [or isentropic bulk modulus]) |
| Air | 101 kPa (isothermal bulk modulus) |
| Solid helium | 50 MPa (approximate) |
What is effective bulk modulus?
The effective bulk modulus (“E-Modulus”) represents the real bulk modulus of oil with consideration of vapor and entrained air.
What is bulk modulus and Poisson’s ratio?
Bulk modulus of elasticity is the ratio of hydrostatic stress to volumetric strain. Poisson’s ratio is the ratio of lateral strain produced in a body for a certain amount of stress to the longitudinal strain produced in the same body for the same amount of stress.
What is bulk modulus and its unit?
The bulk modulus is considered a descriptor of elastic properties because a compressed material returns to its original volume once the pressure is released. The units for the bulk modulus are Pascals (Pa) or newtons per square meter (N/m2) in the metric system, or pounds per square inch (PSI) in the English system.
When to add temperature to fluid bulk modulus?
Set this parameter equal to the number of field variable dependencies included in the definition of the fluid bulk modulus, in addition to temperature. If this parameter is omitted, it is assumed that the fluid bulk modulus depends only on temperature. See Material data definition for more information.
What is the effect of working pressure on bulk modulus?
The effect of working pressure on bulk modulus for hydrocarbon fluids. The effect of temperature on bulk modulus for hydrocarbon fluids. The effect of entrained air on bulk modulus in hydrocarbon and other fluids for different working pressures.
What is the bulk modulus of seawater?
Bulk Modulus for some common fluids: Fluid Bulk Modulus – K – Bulk Modulus – K – SAE 30 Oil 2.2 1.5 Seawater 3.39 2.34 Sulfuric Acid 4.3 3.0 Water 3.12 2.15
How are bulk modulus and coefficient of cubical thermal expansion related?
The bulk modulus and the coefficient of cubical thermal expansion can be used together to compute the pressure rise in a closed system subjected to an increasing temperature. This is the same ΔP which would be caused by adding 2.3 cubic inches of oil with no temperature change.